| Customization: | Available |
|---|---|
| Task: | Adjust |
| Structure: | Combination |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
AI Isolation Backplane PHHS-16AI-M
Number of channels: 16
Mode: two-wire AI, three isolation
Signal type: 2W\3W transmitter and 4W signal (current) with instrument distribution, RTD\TC
With MTL standard HART interface (required to declare before ordering)
Online test port(using XT801 tester)
Installation form: M5 screw fixing or 35mm rail installation
Matching card: C300 & 8-Serial 16AI card
Supporting barrier: Pinghe series Single AI barrier, see the barrier instructions for details
Supporting isolator: Pinghe series Single AI isolator, see the isolator manual for details
Common configurations:
Single input isolation barrier: PHD-11HD-21(with power distribution, supporting 2/4-wire instrument), PHD-11HD-21 (supporting 4-wire HART)
Dual temperature barrier: PHD-11HZ-*1/PHD-11HT-*1
Power supply:
This product is designed for redundant power supply, with power loss alarm output.
Note
The single line (marked with TB2-1 or COM) on the special cable shall be connected to TB2-1 or TB2-4.
| Order model | PHHS-16AI-M |
| Description | 16-ch AI backplane |
| Technical parameters | |
| Number of channels | 16 |
| Supply voltage | 22 ~ 30VDC redundant power supply |
| Power loss alarm output | Normal close |
| Sys connection | D-SUB37P |
| Power connection type | Screw |
| Terminal crimp specification | 0.3~2(mm2) |
| Signal type | 2/3W transmitter, 4W signal Temperature |
| Complete with barrier | |
| Barrier output signal | 4-20mA |
| Operating temperature | -40ºC~+55ºC |
| Storage temperature | -40ºC~+70ºC |
| Dimensions (L*W*H) | 292X174x70mm |
| Install the screws | M5 4PCS |
| Hole spacing | 279.4*101.6mm |
| Enclose | |
| PS fuse | 2Aφ5 glass tube |
| Matching cable | |
| Standard model | FL-37DS-23A32+1-HON32-ADI-Xm |
| Simple model | FL-37DS-23A32+1-H32-ADI-Xm |
| Loose line model | FL-37DS-23A32+1-H-ADI-Xm |
| Note: Horney terminal board shall be provided by the customer for X-length simple model | |
){kind=link}