| Customization: | Available |
|---|---|
| Task: | Adjust |
| Structure: | Combination |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Overview
PHG-11TC-11 communication signal input signal isolator can realize two-way communication of RS-232 digital signals on site and in the control room.
This product needs to be powered independently, and the power supply, input and output terminals are isolated.
Specifications
| Input | |
| Input signal | RS-232 digital signal |
| Output: | |
| Output signal | RS-232 digital signal |
| Transmission delay | ≤10μs |
| Transmission rate | ≤56kbps |
| Supply voltage | 20-35VDC |
| Power consumption | ≤1.5W(24VDC power supply) |
| LED indicator | Green: Power indicator Yellow: The control room transmits signals to the on site Red: transmitting signals from the site to the control room |
| Receiving and transmitting switching time | ≥20ms |
| Temperature parameters | Working temperature: -20ºC~+60ºC storage temperature:-40ºC~+80ºC |
| Relative humidity | 10%~95% RH no condensation |
| Dielectric strength | ≥2000VAC/min(between input/output/power supply) |
| Insulation resistance | 100MΩ (between input/output/power supply) |
| Electromagnetic compatibility | GB/T 18268(IEC 61326-3-1) |
| MTBF | 100000h |
| Wire requirements | Horizontal cutting surface ≥ 0.5mm2; Insulation strength ≥ 500V |
| Applicable field equipments | Communication interface device with RS-232 |

